Why are my horse clipper blades getting so hot ?
Clipper blades heat up as the blades rub together but they should not get too hot.
Oil is Most Significant & Oil in 3 Places :
1) Oil the teeth at the front.
2) Oil the back edge & slide.
3) Oil the drive cam which moves the blades.
Liquid clipper oil is a better lubricant but spray oil is cold and cools the blades.
Next Use Lighter Blade Tension :
When you tighten the tension screw the blades are pulled together more tightly which gets them hotter.
Well sharpened blades with no sharpening burrs will cut with light tension.
– Blunt blades need high tension to cut
– Inaccurate sharpening or sharpening burrs need high tension to cut.
Have them re sharpened by SL Service and they will cut with lighter tension.
Lower Speed :
Some clippers like the Liveryman Black Beauty have a speed control and at slower speeds the blades will heat up less.
Hold the clipper at angle and keep it moving :
Horse clipper blades are designed to be used at an angle with only the front part of the blade in contact.
Holding the clipper like this and keeping it moving means you can clip OK with quite hot blades.
(The large metal part not in contact acts as a radiator to loose heat.)
Set Lister Blade Tension:
Set this by turning the screw all the way and then back 2 or 3 full turns.
Set for Other Clippers:
Turning the nut until you feel resistance then increase approximately 1 full turn.
